Aviation Safety Inspector (General Aviation Maintenance) (Principal Maintenance Inspector)

Reference the U.S. Office of Personnel Management (OMP) Individual Occupational Requirements for Aviation Safety Series (1825) General Requirements for All 1825 Positions: Not more than two separate incidents involving Federal Aviation regulations violations in the last 5 years Valid State driver's license Fluency in the English language No chemical dependencies or drug abuse that could interfere with job performance, and High School diploma or equivalent. Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation. The minimum medical requirements include the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. To qualify for this position, you must meet the Office of Personnel Management Qualification Standards for the 1825 series in the General Aviation Maintenance specialty which requires the following: Experience involving the maintenance and repair of airframes, power plants, and aircraft systems with responsibility for certifying airworthiness. Maintenance experience with aircraft 12,500 pounds or less maximum certificated takeoff weight. Aircraft maintenance experience in a repair station; air carrier or airline repair facility; military repair facility; or local, state or Federal governmental agency. Aircraft maintenance work experience within the last 3 years. FAA Mechanic Certificate with airframe and power plant ratings. Certificate and Ratings: This position requires a certificate and ratings for minimum qualification in the following specialty: General Aviation Maintenance. A copy of the certificate and ratings are required for ALL candidates newly appointed to the FAA in the 1825 specialty of General Aviation Maintenance. Therefore, applicants must submit a copy of their certificate and ratings unless they are currently occupying (or previously held) General Aviation (Maintenance) 1825 Series Position. Specialized Experience: To qualify for this position, you must demonstrate in your application that you possess at least one year (52 weeks) of specialized experience equivalent to the (FG/GS-13) level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position and is typically in or related to the work of the position to be filled. Specialized Experience includes: evaluating complex aircraft maintenance programs, systems, and procedures to ensure compliance with Federal Aviation Regulations and established safety standards; conducting regulatory surveillance, inspections, and investigations of aviation maintenance operations to identify safety deficiencies, determine compliance, and recommend corrective action; and analyzing and resolving complex or unusual aviation maintenance problems involving aircraft systems, operational procedures, regulatory compliance, and public safety. For Lateral Movements Between 1825 Specialties: To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors. NOTE: The recency of specialized experience is waived for current FAA employees in the 1825 series. Applicants should include examples of specialized experience in their work history. Qualifications must be met by the closing date of this vacancy announcement.

The PMI receives administrative direction from management in terms of broadly defined missions or functions. The PMI, mostly independently plans, designs, and carries out programs, projects, studies, or other work. The PMI provides policy assistance to field level Aviation Safety Inspectors (ASIs) on difficult or complex policy interpretations. The work is normally accepted without change. Completed work may be reviewed for adherence to FAA policy and for assurance that project requirements have been fulfilled. Some FG-14 assignments involve service wide responsibility for application of expert knowledge of flight operations for advanced multiengine turbojet aircraft. Such employees are concerned with all aspects of the operational capabilities and limitations of the aircraft. Aviation Safety Inspectors (ASIs) at the FG-14 level establish technical procedures and performance indexes and review complete flight operations programs for leaders in the aviation industry, or organizations of comparable scope and complexity, or a uniquely complex group of general aviation organizations. Assignments at this level are of great scope and unusual complexity. The following assignments are illustrative: 1. As a Service wide expert on a particular type of advanced multiengine turbojet aircraft: Advises other inspectors of major changes in the operation of the aircraft. Standardizes procedures and judgments used by inspectors to evaluate the operation of the aircraft. Evaluates new training methods and equipment (e.g., simulators) for initial certification. Serves on national boards that determine the minimum equipment necessary to operate a particular type of aircraft safely. Serves on boards that evaluate incidents, accidents, complaints, and other serious problems relating to the aircraft. Develops plans to resolve problems. 2. As the principal representative in regulatory oversight of general aviation and air carrier activities, exercises certificate authority over extensive and complex operations. Analyzes flight operations involving large fleets of turbojet aircraft engaged in passenger and freight service. (By comparison, FG-13 employees exercise certificate authority over less complex operations or perform major portions of the certification, inspection, and surveillance under the direction of FG-14 inspectors.) 3. Exercises certificate authority and safety responsibility over a complex of broad and varied general aviation organizations such as air carriers, executive and/or industrial operators, designees, and flight schools when the activities monitored equate collectively to a major air carrier in terms of size and complexity of aircraft fleet employed, scope and technical complexity of operations, management sophistication, industry leadership, and public impact. The magnitude, intensity, and scope of program responsibility are typically such as to require significant and regular assistance of lower graded inspectors. FG-14 employees develop and evaluate flight operations programs for organizations which utilize the newest, most complex aircraft, systems, and equipment. They frequently rely on engineers and designers for specific technical guidance although much of their work is carried out under very broad policy guidelines. Supervisors give FG-14 employees a wide leeway for independent action. Other inspectors seek their advice on problems relating to aircraft and their operation. Because of the precedent-setting nature or substantial effect on the aviation industry or public safety, their decisions may be reviewed and approved at a higher policy- setting level. The PMI plans and directs the use of time and resources to accomplish organizational objectives. He or she defines, organizes, and uses resources to accomplish work activities within established schedules, analyzes program requirements and accomplishments, and makes or directs adjustments as necessary to address organizational needs. Performs other duties as required.